NewsNews

KeywordKeywords

Motor lock seriesProduct

Dongguan Kaijilong Lock Industry Co., Ltd.

Phone：189-2656-2355

Email：825505427@qq.com

Website：https://en.dgkjl.com.cn/

Address：Factory Building A-B, Nanxiong Industrial Zone, Sukeng Village, Changping Town, Dongguan City

Detailed introduction to the use of magnetic locks

2025-02-20 14:48:34

0次

Explosion-proof magnetic lock tips

1. The explosion-proof magnetic lock top cover adopts an open top cover, and the minimum distance between the top cover edge and the ground is 1950mm, so that the operator does not feel any depression in the channel, and the top cover will not cause any harm to the operator when it is opened. The channel top plate is adsorbed on the top cover frame through the electromagnetic lock, and the heat dissipation effect is good.

2. Infrared induction switch explosion-proof magnetic lock: size 86mm*86mm, stainless steel wire drawing process, weight 0.085kg (including packaging) flame retardant advantage, high and low temperature resistance

The distance should be 5-10cm, and the application cost and cycle of explosion-proof electromagnetic locks of different institutions are different. The customer commissioned a tripod to test the explosion-proof electromagnetic lock explosion-proof certificate inspection and successfully obtained the explosion-proof certificate. Since the beginning of this year, the development of the smart lock industry has experienced ups and downs, upstream chip shortages, and rising raw material prices. The smart lock industry is facing a new round of restructuring.

磁力锁

Only a small current electromagnetic lock will generate a huge magnetic force. The access control system that controls the power supply of the electromagnetic lock recognizes the person correctly, and the electromagnetic lock loses suction and can open the door. Since the electromagnetic lock does not have a complex mechanical structure and lock tongue structure, it is suitable for path control of escape doors or fire doors.

The inside of the lock body is filled with epoxy resin. At present, the suction strength of the electromagnetic lock is expressed in LB (pounds) based on the suction strength of the electromagnetic lock, and the test method is static pressurization. The so-called static pressurization means that after the electromagnetic lock is powered on, the tension of the adsorption iron plate gradually increases, and when the adsorption iron plate exceeds the suction of the electromagnetic lock, the adsorption iron plate.

The data of this tension is the tension value of the electromagnetic lock. In addition, the force between the electromagnetic lock and the adsorption iron plate must be face-to-face and linearly pressurized, so the electromagnetic lock has a large suction force. Due to the magnetic induction of the electromagnet, the adsorption iron plate may be magnetized for a short time.