NewsNews

KeywordKeywords

Motor lock seriesProduct

Dongguan Kaijilong Lock Industry Co., Ltd.

Phone：189-2656-2355

Email：825505427@qq.com

Website：https://en.dgkjl.com.cn/

Address：Factory Building A-B, Nanxiong Industrial Zone, Sukeng Village, Changping Town, Dongguan City

A brief talk about electric locks

2025-02-20 14:49:27

3次

Magnetic lock opens inside and outside: that is, the direction of opening. Glass doors mostly open outside, and iron doors open inside and outside. Opening inside and outside will result in different magnetic lock bodies and different equipment methods, so when choosing a magnetic lock, you must determine whether the door opens inside or outside.

Tensile strength: Magnetic locks are divided into 150.180.270.300.500 grades according to tensile strength. The tensile strength directly determines the safety of the system and the price of the product. Therefore, when choosing a magnetic lock, it is necessary to clarify the parameters.

Locking condition: Whether the locking condition is one of the main parameters of the magnetic lock. As for the magnetic lock without a lock, the power consumption is large and the lock body temperature is high. Assuming that the heat dissipation effect of the equipment is poor, the service life of the lock body can be shortened. Other lock conditions can be used as the basis for the controller to judge the door opening timeout alarm.

Locking condition: Whether the locking condition is one of the main parameters of the lock.

For a lockless electric mortise lock, its normal current is the same as the bolt action, the power consumption is large, and the lock body temperature is high. Assuming that the heat dissipation effect of the equipment is poor, the service life of the lock body may be shortened; the normal current of the electric mortise lock with lock is equivalent to less than half of the operating current, the power consumption is small, the lock body temperature is low, and the service life is long.

Other lock conditions can be used as the basis for the controller to determine the door opening timeout alarm.

Positioning beads: Positioning beads are sliding beads that help position the door body. Generally, glass doors control the stability and accuracy of the door body return by adjusting the spring, while wooden doors control the door body return by the door closer, so the positioning beads are not very effective.

The friction noise generated by the positioning beads is also large, affecting the working environment of the work area.

Adjustable delay: The so-called delay refers to the length of time from opening the lock, closing the door after people enter, and locking the electric bolt lock again. If this time plan is exceeded, an alarm signal for door opening overtime will be generated.

In most cases, some electric control lock equipment accessories need to be selected. When selecting electric control locks, users should clearly describe the detailed door body conditions and equipment requests.

The following details several accessories that may be used in electric control lock equipment of my country's top ten lock brands.

Lower door clamps matched with electric bolt locks: When the glass door body has no frame, you need to select lower door clamps. The lower door clamps are generally made of aluminum alloy and are directly clamped on the door glass.

Matching electric bolt lock. Lower door clamp: When the upper and lower glass doors are frameless glass, the upper door clamp and lower door clamp must be selected. Since the upper door clamp is required to wrap the electric bolt lock body and fix it on the glass, the upper door clamp is of very good quality and large size, and is generally made of stainless steel.

The lower door clamp must match the upper door clamp, which is different from the lower door clamp selected separately. The cost of the upper door clamp is relatively expensive.

U-shaped bracket matching magnetic lock: When the glass door body is frameless, a U-shaped bracket needs to be selected, mostly made of aluminum alloy.

L-shaped bracket matching magnetic lock: When the iron door is opened, an L-shaped bracket is usually required. The bracket is mostly made of aluminum alloy. Anode lock body matching cathode lock: This lock body is generally a mechanical anti-theft lock, and the lock tongue cannot be a square tongue.