Technical Information
Position: Home> News>Technical Information

KeywordKeywords

Motor lock seriesProduct

Dongguan Kaijilong Lock Industry Co., Ltd.

Phone:189-2656-2355

Email:825505427@qq.com

Website:https://en.dgkjl.com.cn/

Address:Factory Building A-B, Nanxiong Industrial Zone, Sukeng Village, Changping Town, Dongguan City


Where is the use of electric locks?

2025-02-20 14:46:55
0

Electric bolt lock is an electronically controlled lock that drives the "lock tongue" to extend or retract by switching on and off the current to lock or open the car door. Of course, the door closing and opening functions need to be realized in conjunction with the "magnetic sheet". Usually, the electric bolt lock consists of two main parts: the lock body and the lock hole. The key component of the lock body is the lock tongue, which can cooperate with the lock hole to achieve the two states of "closed" and "open". That is, the lock tongue is inserted into the lock hole to close the door, and the lock tongue leaves the lock hole to open the door. Because of the telescopic function of the positive bolt, it is named "electric bolt lock". It is precisely because of this feature that electric bolt locks are often used in various swing doors (two-way opening). At the same time, its "hidden installation" feature is more suitable for places with high requirements for the confidentiality of the lock body.

电插锁

Electric bolt locks are divided into two types: power on unlocking and power off unlocking. That is, the former is powered on when the lock tongue is inside, that is, the door is opened, and the latter is the opposite. But in general, fire protection requires power off to open the door to ensure that the door can be opened automatically in the event of a fire!
Locks can be divided into 2 cores (power + and -), 5 cores (power + and - and two state points of door magnet and common point) and 8 cores (power + and - and two state points of door magnet and common point and three points of lock core).
A simple way to distinguish the quality of surface locks is to look at the appearance. Another simple way is to weigh it by hand. Generally, the good ones are heavier.
When installing, the lock body (including the bolt part) should be installed in the spine, and then the lock piece (including the keyhole part) should be installed on the top of the movable fan. When installing, pay attention to adjusting the corresponding position of the lock tongue and the lock hole, as well as the corresponding position of the lock tongue and the floor spring and the floor lock. For frame glass doors, use locking parts. However, for frameless glass doors, a small door clip "lower bracket" must be used as a keyhole.

标签

CONTACT

Telephone:0769-82836677

Phone:189-2656-2355

Email:825505427@qq.com

Address:Factory Building A-B, Nanxiong Industrial Zone, Sukeng Village, Changping Town, Dongguan City